0 2 min 5 mths



http://www.apdty.com

01:02 – Disconnect AC Lines to Condenser
01:09 – Remove Top Mounting Brackets For Radiator
01:25 – Remove 10mm Bolt From Each Pedestal
01:50 – Disconnect Electrical Plug to Drier
02:10 – Remove Air Diverters
02:32 – Remove Shield Under Car
02:59 – Remove Lower Bolts
04:07 – Remove Top Bolts on T-Bracket
05:09 – Remove Lower Bolt on T-Bracket
05:35 – Remove Condenser
07:45 – Compare Old vs. New
08:51 – Remove Sensor on Drier
09:05 – Salvage Parts From Old Condenser
09:22 – Assemble New Condenser
12:35 – Place Condenser In Car
13:41 – Reinstall metal tab inserts and Bolt Them
14:59 – Bolt Condenser to Radiator
15:39 – Reinstall T-Bracket
16:35 – Bolt Top Mounting Brackets
16:50 – Reinstall Air Diverter
17:07 – Bolt Power Steering Line and Bumper
17:30 – Reconnect Drier Plug
19:02 – Unplug Electrical Connector to Compressor
19:55 – Remove Top Lines to Compressor
20:49 – Remove Serpentine Belt
22:02 – Remove Connectors and Bolts to Compressor
24:57 – Remove Compressor
25:50 – Compare Old vs. New
27:28 – Transfer Line Mounts
28:12 – Transfer Bracket
29:03 – Preparing Compressor to Mount
29:33 – Install New Compressor
30:28 – Reconnect Plugs and Replace O-Rings
31:26 – Reconnect Lines to Compressor
32:27 – Reconnect Lines to Condenser
33:24 – Install Serpentine Belt
33:54 – Remove Expansion Valve
43:44 – Problems Encountered
37:41 – Replace O-Rings
37:53 – Compare Old vs. New
38:33 – Install Expansion Valve
39:55 – Replace Broken Connector
50:34 – Apply Vacuum to AC System
53:18 – Charge AC System

Source