0 2 min 3 weeks



No Heat? Furnace won’t ignite? It might be a quick test and an easy fix.
In this episode of Repair and Replace, Vance shows how to troubleshoot and replace the hot surface ignitor in a gas furnace. If the furnace shuts off after a few seconds or if the burners don’t ignite, then the ignitor might have failed.

If the airflow inside the burner is good, then the ignitor will glow and will ignite the gas. If the ignitor fails, then the furnace might cycle on and off, and will not function properly. The ignitor can be easily tested for continuity before it is replaced.

Buy ignitors online: http://www.amresupply.com/catalog/Ignitors-HV2L

Learn how a furnace works: https://youtu.be/tVLtJwix-_8

If your furnace isn’t working, then watch our troubleshooting guide: https://youtu.be/qRmNrmjKEyk

More furnace repairs: https://www.youtube.com/playlist?list=PLCo9SMjkdWBwU5dJaopTR09W7U05fEOF5

___________________________

00:00 Intro
00:27 How it Works
01:00 What You’ll Need
01:29 Step 1: Disconnect the Furnace
01:50 Step 2: Remove the Ignitor
02:15 Step 3: Test the Ignitor
02:44 Step 4: Replace the Ignitor
03:01 Reconnect the Furnace

___________________________

AMRE Supply provides homeowners, service contractors, and property management with the parts and knowledge needed to get the best performance out of any property. Stocking the largest selection of appliance parts, heating, plumbing, lighting, and janitorial supplies, AMRE ships almost anywhere in Canada within 24 – 48 hours. Expert help is available online, over the phone or in person at one of the many locations across Canada.

Connect with AMRE Supply
Website – https://www.amresupply.com
Facebook – https://www.facebook.com/amresupply
Twitter – https://twitter.com/amresupply
Instagram – https://www.instagram.com/amresupply

Source